As a kind of organic silicon synthetic polymer material, BGK silicone tape has good chemical corrosion resistance, heat resistance, cold resistance and water repellency, and is widely used in food, medical, health and other industries. Silicone is an organic silicon oxide polymer. It has a unique molecular structure. The carbon in the molecule where silicon and oxygen form a double bond is replaced by silicon. This combination of typical inorganic structure and organic groups makes silicone resin as a unique material, and its particularity cannot be achieved by any other plastic. Silicones can be subdivided into different products. For example, silicone oil and resin belong to silicone, silicone oil is suitable for the production of coatings, and silicone rubber is suitable for conveyor belts. BGK silicone tape can be used in wet and dry environments, and combined with a matching body, it can be used in extremely cold (as low as -50°C) and extremely hot (as high as 300°C) environments. The study found that silicone has good physiological safety characteristics, suitable for direct food contact and health industry applications. The latter fact has been demonstrated in cookware by an increase in the amount of silicone used. Another outstanding feature of the silicone material used as a belt coating is its toughness, while providing a high coefficient of friction, it has very good wear resistance. In addition, silicone rubber has excellent oxygen resistance, ozone resistance and ultraviolet radiation resistance, long-term outdoor use is not brittle.

1. bakery products are classified according to the category of bakery products: bread, bagels, pastry, biscuits, cakes and desserts. 2. baking food on the conveyor belt requirements baking food production and processing on the conveyor belt requirements are extremely harsh. Conveyor belts need to meet food grade requirements, at the same time, they also need to have excellent high temperature resistance, oil resistance, transverse stability, softness in warp direction (through knife edge), surface coating materials that do not crack and fall off, burr-free performance, mildew resistance and antibacterial performance. At the same time, conveyor belts should have anti-sticking function: for example, dough conveyor belts should have anti-sticking property, dough cannot stick to the surface of conveyor belts, and has good vegetable oil resistance.

As a kind of organic silicon synthetic polymer material, BGK silicone tape has good chemical corrosion resistance, heat resistance, cold resistance and water repellency, and is widely used in food, medical, health and other industries. S-5108 S-5108-Universal silicone conveyor belt. Silicone tape S-5108 have a low coefficient of friction in use due to their use of cotton as the carrier material, which makes the belt very suitable for hard blades.

PU conveyor belt: polyurethane (PU) as the production of raw materials for conveyor belt, product formula is scientific and reasonable, in line with food hygiene standards can be in direct contact with food, color moderate, no smell. 1. characteristics PU conveyor belt has oil resistance, corrosion resistance, cold resistance, cutting resistance and other characteristics. Polyurethane (PU) conveyor belt uses specially treated high-strength synthetic polyurethane fabric as the carrier skeleton, and the coating layer is made of polyurethane (PU) resin. It not only has the characteristics of high tensile strength, good bending, light, thin and tough, but also has the characteristics of oil resistance, non-toxic health and easy cleaning. This type of conveyor belt is fully in line with the United States FDA health standards, wear-resistant, anti-physical aging, is a durable conveyor products. Shanghai Ouzhou (EIB)-- PU Conveyor Belt (I) 2. Use PU Conveyor Belt is widely used in the food industry or food sector to transport grain, biscuits, candy, fruit and vegetable processing, poultry and meat processing and other related industries in bulk, tins and boxes. Shanghai Ouzhou (EIB)-- PU Conveyor Belt (II) 3. The advantage of PU belt in food transportation is food, such as candy, pasta, meat, seafood, baked goods, etc. PU conveyor belt should be selected. 1, PU conveyor belt main PU (polyurethane) as the glue surface, bright and clean, non-toxic and tasteless, can be in direct contact with food. 2. PU conveyor belt is resistant to oil, water washing, cutting, thin, tough and tensile. From the perspective of food safety, PU (polyurethane) is a material that can be dissolved in nature, known as green raw materials, and does not contain harmful substances to the human body, so it is best to choose PU conveyor belt for transporting food. 4. Considering the service life, PU conveyor belt is a kind of cutting belt, which can be used on the cutting machine to reach a certain thickness, can be cut repeatedly, and the service life is relatively long.

Round belt: round belt is a kind of belt drive, its cross-sectional shape is circular, which is different from flat belt drive, V belt drive and synchronous belt drive, so it is called round belt. Round belt is also called polyurethane round belt, round belt can be connected, usually PU material, PU is the abbreviation of Polyurethane, Chinese name is polyurethane polyurethane for short. Orange smooth round belt (PU) 1. working principle and application 1. Working principle: round belt transmission is friction belt transmission. The transmission belt is tightly sleeved on the two pulleys to generate pressure between the belt and the pulley contact surface. When the driving wheel rotates, the friction force generated between the belt and the driving wheel contact surface makes the belt move. At the same time, the belt relies on the friction force between the contact surface with the driven wheel to drive the driven wheel to rotate, So as to transmit motion and power. 2. Round belt application: Round belt is used in round belt transmission. Round belt transmission relies on the compression of the belt and the wheel groove to generate friction. It has good elasticity. It can relieve impact and vibration during operation, with stable movement, low noise and excessive load. When the belt slips, it protects the machinery. Round belt drive used in low-speed small power transmission, such as sewing machines, tape disc transmission and other small power or manual machinery as a drive. Shanghai Ouzhou (EIB)-Round Belt regular Customized Table 2. Working Features and Advantages: 1. Because the round belt is elastic body, it can alleviate the load impact and move smoothly without noise. 2. Overload will cause the belt to slip on the pulley, thus preventing damage to other parts. 3, manufacturing and installation accuracy is not as strict as meshing transmission. 4. The belt length can be increased to adapt to the working conditions with large center distance. Disadvantages: 1. The elastic sliding of the belt and the pulley makes the transmission ratio inaccurate, the efficiency is low, and the life is short. 2. When transmitting the same large circumferential force, the outer dimension and the pressure on the shaft are larger than the meshing transmission. 3, not suitable for high temperature, flammable and other occasions. Green rough and orange smooth round belts (PU) 3. round belt types Round belts are generally divided into smooth round belts and rough round belts: round light belts are orange with a hardness of 90, and round rough belts are dark green with a hardness of 85. The surface finish of the light belt is good, the color is bright, the surface of the rough belt is rough, the particles are uniform and neat, the hand feels comfortable, and the application range is wide. According to the material is divided into: pu round belt, tpu round belt and volta round belt. Its specifications can be produced from Φ2~Φ30. Applicable operation mode: packaging machine, printing machine, textile machine, transmission wheel, ceramic tile, cement tile, floor tile, food, wooden products, canned food, newspaper, printed matter, etc.

Type: IRONRUBBER (polyurethane) belt includes synchronous belt and flat belt. According to the manufacturing method, there are: non-joint ring type, joint type and linear opening type. Non-joint ring type F-non-joint ring type: continuous spiral high-strength steel wire core (or stainless steel wire core) and IRONRUBBER integrally formed non-joint ring type synchronous belt are embedded in the belt. NOK company can cooperate with the mechanical wheelbase to manufacture the integral forming synchronous belt of any length. Type F schematic diagram has joint type J-joint type: parallel high-strength steel wire core (or aramid fiber core) and IRO are embedded in the belt

NOK Co., Ltd. was established in 1939. The company is located at No. 13, No. 12, Mita, Port District, Tokyo. It is one of the world's largest polyurethane product manufacturers and a Japanese stock listed company with annual sales of 250-30 billion RMB. NOK products occupy more than 70% of the market in Japan and more than 50% of the market in other countries. NOK has always maintained a leading position in the technical research of polyurethane synchronous belts, and most of the research has not been carried out by predecessors, turning many "impossible" into "possible". The high temperature resistant and high pressure resistant polyurethane synthetic rubber developed in the 1960 s

Polyurethane (PU or PUR) is a very versatile plastic. Depending on the production process, it can be brittle and hard, or soft and elastic. PU is very wear-resistant, so it is used, for example, as a protective coating in pipes or for transporting bulk items. PU is also widely used in the food industry. Unlike PVC, another advantage of PU is that it does not contain plasticizers, and the aging stability of PU is good even in extreme weather conditions and strong ultraviolet radiation. These excellent characteristics of the above PU is the ideal choice for high quality BGK capless tape coating. P

Polyurethane (PU or PUR) is a very versatile plastic. Depending on the production process, it can be fragile or soft and elastic. PU is very wear-resistant, so it is used for example as a protective coating in pipes or for transporting bulk items. PU is also widely used in the food industry. Unlike PVC, another advantage of PU is that it does not contain plasticizers, and the aging stability of PU is good even in extreme weather conditions and strong ultraviolet radiation. These excellent characteristics of the above PU is the ideal choice for high quality BGK capless tape coating. P-5

As a kind of organic silicon synthetic polymer material, BGK silicone tape has good chemical corrosion resistance, heat resistance, cold resistance and water repellency, and is widely used in food, medical, health and other industries. S-5108 S-5108-Universal silicone conveyor belt. Silicone tape S-5108 have a low coefficient of friction in use due to their use of cotton as the carrier material, which makes the belt very suitable for hard blades. As a universal and flexible conveyor belt, it is very suitable for dynamic belt scales. The most important thing is that it can be directly in contact with food, and the silicone coating in its belt ensures the hot and cold temperature

Neoprene is a synthetic rubber used in the automotive industry and insulation industry. This material was introduced on the market in 1930. Its sulfide is very resistant to chemicals (such as oil), and it is not sincere and wear-resistant, and can prevent and resist water. BGK neoprene belt is durable and highly flexible, which makes it almost slip-free transmission of power and power in high-speed and powerful drive system applications. Due to their abrasion resistance, BGK neoprene belts are the perfect solution for this type of application. N-5104 N-5104 based on polyester-polyamide belt body